Bikes are one of the most fascinating things you can see on the roads, which are a pure miracle of science and technology. The modern motorcycles are having complex machineries. Though these heavy machines are the main forming body of these bikes yet there are many small key structures which make the bike efficient. A swing arm bearing is one of such accessories and it is a very important part of sports motor bikes.
- Fitting– the swing arm bearing is one of such things which need accurate fittings. If the fittings are not good they won’t perform its best. The rotation you require will be less and then it will create problems.
- Compatibility– not all the bearings are compatible with every bike. Some of the companies make the swing arm bearing specifically for some bikes; hence you should be completely sure that which one is compatible with your bike. Most of the companies mention the compatibility in their description.
- Strength– Since the swing arm bearings are accessories that are mainly made of steel, they are highly exposed to corrosion. They can get destroyed easily so many of the companies provide a coating over these bearings. This gives you an advantage so by them accordingly.
Here in this article we will recommend you the Top 15 swing arm bearings that you must try-
- 1. Swing Arm Bearing Kits, Fits: Honda (1992-2001): CR 250R
- 2. Swing Arm Bearing Kits by Factory Links, Fits
- 3. All Balls 28-1056 Swing Arm Bearing Kit–
- 4. Pivot Works PWSAK-S17-400 Swing Arm Kit–
- 5. All Balls 28-1023 Swing Arm Bearing Kit–
- 6. Swing Arm Bearing Kits by Factory Links–
- 7. All Balls 28-1155 Swing Arm Bearing Kit-
- 8. Pivot Works PWSAK-H30-400 Swing Arm Kit–
- 9. All Balls 28-1053 Swing Arm Bearing Kit–
- 10. All Balls 28-1180 Swing Arm Bearing Kit–
- 11. [Factory-Links] Linkage Bearing Rebuild Kits–
- 12. All Balls Swing arm Bearing Kit Replacement For 17-19 KTM 250SX–
- 13. [Factory-Links] Swing Arm Bearing Kits, Fits- Honda (2002-2007)
- 14. All Balls 28-1180 Swing Arm Bearing Kit
- 15. All Balls 28-1005 Swing Arm Bearing Kit
- More from my site
It is a perfect fit for Honda bikes which were manufactured from 1992 to 2001. It is a premium kit which is made for all the ground up performances that one need. It contains the best OEM quality accessories, which are best suited for Honda dirt bikes. This one mentioned here is a kit with bearing, collars, pins and others.
- It is a complete kit with reasonable rate
- The bearings are highly durable
- Limited to very few models
Yamaha WR 250F (02-05), 426F (02-02), WR & YZ 450F (03-05), YZ 125 (02-04), YZ 250 (02-15), YZ 250F (02-06)- one of the best OEM quality kit designed for Yamaha in the market. 52100 Chrome steel makes the product very long lasting one. Without a doubt it would be a perfect swing arm bearings kit which can be equipped in your Yamaha Dirt bikes.
- The installation is very easy
- The kit is made up of Chrome steel with high durability
It is a highly precise and hard swing arm bearing. The kit has everything you will need to build an accurate ball bearing. All the parts undergo a proper coating to prevent corrosion and other damage. The main POM composite washer beating is replaced by new modern washer to make things stronger.
- There is a special coating for anti-corrosion.
- The new thrust needle washer has increased the durability.
- The spacer tube is a problem in some of the cases.
One of the best rated swing arm kit that has the useful needle bearings, the thrust washer and bearing. The company gives you its product with a lifetime replacement warranty of the defected parts on some terms and conditions. The thrust bearing is a speciality and it provides a better rotatory movement.
- You get a life time replacement.
- In most of the cases it is a perfect fit
- You can expect more materials at this price.
This swing arm bearing is one among the most efficient and famous one in the market it also uses the 52100 chrome steel hence is very strong and efficient. All the metal parts are given a varnishing to get a tight protection and hence these parts don’t get corroded easily. It’s one of the highly recommended products in the market.
- The product is resistant to dents and damage
- It comes with a thirty day return policy.
The swing arm bearing fits: KTM (2003-2017): Husqvarna (2014-2016):Husaberg (2012-2013). This premium swing arm bearing set too comes with the OEM quality. You can use them to increase the efficiency of your motorbikes. They are easily attachable to your vehicle. The set is highly recommended for KTM bikes. It is often a perfect fit hence it remains in demand.
- It is very good with KTM.
- The steel quality is very good.
- Remains out of stock so it is very hard to obtain.
You can use this high quality kit for different bike models. The kit is a proper assembly for swing arm bearing. The needle shaft is of a great resistant material and it provides the essential properties you need for your bike. The service life is increased by new washer.
- The coating for resisting corrosion is great
- POM composite washer increases the efficiency and strength.
- This one again has limited number of items.
The company provides a lifetime replacement with this material too. The other plastic bearings are very slow and weak whereas this one has a special addition to its washer, making it much smoother and more efficient. The needle bearing meets the OE quality so you could be assured of the performance.
- It is a perfect set for trx450.
- The price range is very cheap and hence a must buy.
- Nothing specific.
it is one of the best ground bearing steel which will improve your motorcycle’s performance. It is manufactured precisely and has been hardened properly. All the metal parts are highly polished and are made resistant to all the corrosive processes which can destroy the strength of your bearings.
- The parts are well polished.
- The strength of the swing arm bearing is very good.
- There are very limited numbers of parts in the kit.
It is a complete new lookout to swing arm bearings. It is an accurate fit for Honda ATC350X 1985 – 1986. It stands on the OEM specifications of Honda. You get a one year warranty, and a good replacement guarantee. The company claims that you will get the best price with no middle man. The assistance is very good hence you can get solutions to your problems at any time by contacting the customers service.
- It has a one year warranty.
- The product is very good with assistance
- Not compatible with a lot of bikes.
it is a good fit for bikes like Suzuki (2004-2009): RM 125, RM 250, RMZ 250, RMZ 450. It is one of the best suited for Suzuki dirt bikes. The kit also has a shock absorbing bearing kit. It is a premium kit having a number of materials including many good quality bearings. The chrome steel is very good and has high durability.
- The kit contains number of premium quality materials.
- The shock bearing kit is very good
- The fit gets improper in number of cases.
It is like one of the other bearings for KTM and you can trust on this one to get the best performance. The parts are very well laminated and they are worth trying. The swing arm bearing comes with a one year warranty. It is one of the best modern replacement to the classic bearings.
- Best fit for KTM
- Well laminated bearing
- Some parts are little fragile
CR 250R, CRF 450R. The material quality is chromic steel and this one is very durable and can be used for a long time. The OEM quality of the material is worth it, and it is a great replacement also it helps efficiently in improving your components service life. There are 4 washers in the kit which are very good enough with the new thrust technology. They are highly resistant and a bike lover will love using it.
- The set is a premium quality one
- Highly compatible for Honda dirt bikes.
- Limited to a number of bikes
It fits in the model Honda ATC350X 1985 – 1986. The OEM specification is very good for the new bikes and it is very compatible with Honda bikes. The installation is very good and easy and you can easily remove and clean of the parts when you want.
- No middleman delivery, so price is low
- One year warranty so it a great deal
- It is a low durability item.
The POM composite washer is replaced with the new thrust needle. There is hard chromic steel and so you get good resistance. All metal are brushed and hardened by the new anti-corrosion technology. The pieces are made precisely to fit certain bikes.
- Best suited for 86 LT250r.
- The pieces are made stronger by coating
- Limited to very few bikes.