Have you ever accidentally dropped your phone in water? It’s a heart-stopping moment that sends panic through our veins. We rely on our phones for everything these days, and the thought of losing all those important contacts, messages, and photos is enough to make anyone break out into a cold sweat. But fear not! With a little bit of know-how and some quick thinking, it’s possible to fix a water damaged phone. In this blog post, we’ll guide you through the necessary steps to revive your beloved device and get it back up and running again. So let’s dive in!
Be proactive and protect your phone
Accidents happen, and dropping your phone in water is one of the most common mishaps. But did you know that there are preventative measures you can take to protect your device before it even happens? Here are some tips to keep in mind:
Firstly, invest in a waterproof phone case. These cases are specifically designed to protect your phone from water damage and come in various styles and designs.
Secondly, avoid taking your phone with you when engaging in activities where it’s likely to get wet such as swimming or boating. If you must bring it along, make sure it’s protected by a waterproof case.
Thirdly, be mindful of where you place your phone at all times. Avoid leaving it near bodies of water or on surfaces that may become wet.
Consider purchasing insurance for your device so that if the worst does happen, you’re covered financially.
Taking these proactive steps can save you the hassle and expense of having to fix a water damaged phone down the line!
Please turn it off ASAP!
If you’ve accidentally dropped your phone in water, the first thing you need to do is turn it off immediately. Many people make the mistake of trying to see if their phone still works after getting wet, but this can cause more damage and potentially short-circuit the device.
By turning off your water damaged phone as soon as possible, you’re preventing any electrical currents from running through its circuits and causing further harm. This also ensures that your data won’t be lost due to a sudden shutdown or malfunction.
If your phone has a removable battery, take it out right away. This will prevent any power from being supplied to the device while it’s still wet. If you have an iPhone or other non-removable battery smartphone, hold down the power button until it shuts off completely.
It’s important not to try charging or plugging in your phone before drying it out thoroughly – this can create more moisture inside the device and cause permanent damage.
Remember: time is of the essence when dealing with water damage on electronics! Don’t hesitate – turn off that wet phone ASAP!
What not to do after you dropped a phone in water
After accidentally dropping your phone in water, it can be easy to panic and make the wrong decisions. However, there are some things you should avoid doing after your phone has been submerged in water.
Firstly, do not turn on or charge your phone immediately after it’s been dropped into the water. This can cause an electrical short circuit and permanently damage your device. Even if it appears dry on the outside or seems to be working fine, resist the urge to turn it back on.
Secondly, avoid using heat sources like hair dryers, ovens or microwaves to dry out your wet phone. Applying heat directly to a wet phone can cause further damage by melting internal components or distorting plastic parts.
Thirdly, do not shake or blow air into the ports of a water damaged phone as this will worsen any moisture inside and spread liquid further into corners that may have remained undamaged up until that point.
Don’t assume that just because everything appears normal after drying out for a while means nothing is broken – even microscopic amounts of moisture trapped deep within circuits could eventually corrode key connections over time leading failure later down the line.
Disassemble the water damaged phone
Disassembling a water damaged phone may seem like a daunting task but it is crucial in saving the device from permanent damage. Before starting, make sure to have all necessary tools on hand such as screwdrivers and plastic opening tools.
Firstly, remove the SIM card and any other removable components such as the battery or back cover. Next, locate all screws holding the phone together and carefully unscrew them using the appropriate size screwdriver.
Once all screws are removed, gently pry open the phone casing with a plastic tool while being cautious not to damage any internal parts. Take note of where each component was placed within the phone for easier reassembly later on.
After separating all components, use a soft cloth or cotton swab dipped in 99% isopropyl alcohol to clean off any visible water residue on each part. Allow sufficient time for everything to completely dry before attempting reassembly.
Remember that disassembling a water damaged phone can be risky and should only be attempted if you feel confident doing so. If unsure, seek professional assistance instead of risking further damage to your device.
Try to dry the exterior
After disassembling the water damaged phone, it’s time to focus on drying the exterior. Start by gently wiping down the outside of the phone with a dry cloth or towel. Be careful not to press too hard or rub vigorously as this may cause further damage.
Next, use compressed air to blow out any excess moisture in ports and crevices. This can be done using a can of compressed air or a hairdryer set on cool mode.
If you don’t have access to compressed air, try placing the phone in a bag of uncooked rice for at least 24 hours. Rice is known for its ability to absorb moisture and could help draw out any remaining water from inside your device.
Another option is silica gel packets which are commonly found in shoe boxes and other packaged goods. These small packets contain desiccants that help remove moisture from electronic devices including phones.
Remember that it’s important not to rush the drying process as attempting to turn on your device prematurely could lead to irreparable damage. So take your time, be patient and let nature do its work!
Maybe a vacuum cleaner?
It may sound like an odd solution, but using a vacuum cleaner can actually be helpful in fixing a water damaged phone. Before you start, make sure that the vacuum is set to its lowest setting and remove any attachments.
The goal here is to create suction and draw out as much moisture from the phone’s ports and crevices as possible. Hold the vacuum nozzle about an inch away from the device so that it doesn’t come into direct contact with your phone.
Work patiently around all edges of your phone for at least 20 minutes, focusing on every orifice such as charging ports and headphone jacks where water might have seeped inside.
If there’s still visible moisture present after using this method or if you feel uncomfortable doing it yourself, turn off the device immediately and seek professional help instead. Remember that while this trick can sometimes work wonders, it should only be viewed as one step in a more comprehensive process to fix water damage on your mobile device.
Time to dry out the water damaged phone
After disassembling the water damaged phone and trying to dry the exterior, it’s time to focus on drying out the interior. This is a crucial step in fixing a water damaged phone because any remaining moisture can cause further damage or corrosion.
One of the most effective ways to dry out a water damaged phone is by using uncooked rice. Simply bury your phone completely in a bowl of rice and leave it for at least 24 hours. Rice has natural moisture-absorbing properties that can help draw out any remaining liquid from your device.
Another option is to use silica gel packets, which are often found in shoeboxes or electronic packages. These small packets contain tiny beads that absorb moisture quickly and efficiently. Place your disassembled phone along with some silica gel packets in an air-tight container for several hours.
If you don’t have access to either rice or silica gel, simply leaving your disassembled phone in a warm, dry place for several days can also be effective. Avoid using heat sources like hairdryers as they may cause further damage.
Remember, patience is key when drying out a water damaged phone. Rushing this step could result in irreversible damage and data loss. Allow enough time for all components of your device to completely dry before attempting to turn it back on again.
Try turning it back on!
After following all the previous steps, it’s time to try turning your water damaged phone back on. If it turns on and functions properly, then congratulations! You’ve successfully fixed your water damaged phone.
However, if it doesn’t turn on or is still malfunctioning, you may need to take further actions such as visiting a professional technician or purchasing a new device altogether.
In conclusion (oops!), fixing a water damaged phone can be quite challenging but with the right steps and tools at hand, it is possible to revive your device. Remember to always be proactive in protecting your phone and act quickly if an accident occurs.
once upon a time there was a engineer.
Now he is cook, blogger, desperate,gamer,developer,
And most importantly #single
#dropoutengineer
