The water level controller is a device that can monitor the tank’s water level and avoid unnecessary wastage of water. The device can be used in all fields where the water tank is placed like home, office, and industrial places. A small device but works much more than its size.
- 1. Fully Automatic Water Level Controller with Indicator
- 2. Mivan Technologies Fully Automatic Water Level
- 3. Microtail Fully Automatic Water Level Controller
- 4. Blackt Electrotech (BT21CSP) : Fully Auto Water
- 5. Imagine Technologies Fully Automatic Water
- 6. Digitix Water Level Controller + 5 meter Sensor
- 7. JR Electrokits 12V DC Fully Automatic Water Level
- 8. Magnus Automatic Water Level Controller with Float
- 9. HELICS (RCW-420)(36-mfd) : [Fully-Automatic] Submersible
- 10. KREENA TECHNOLOGIES MS Body Microcontroller
- 11. WADERS Black Water Level Pump Controller
- 12. IoTfiers ABS Water Level Indicator with Musical
- 13. Ritchie Plastic Automatic Water Level Controller
- 14. SWIPE Hitech Fully Automatic Water Level Controller
- 15. PIONEER CONTROLS Automatic Water Level Controller
- More from my site
The device controls both underground and overhead tank easily and efficiently. It can be work with any single phase motor work with MCB switch type Starter for home, office, hospital, and restaurant. There is no workforce required to operate the machine, though it’s designed with an automatic sensor and 2HP capacity. The device is made for a long-lasting and no mechanical system to overheat and dry running. The device is a maximum weight of 1.17kg.
The device is well designed to save water, and there is three sensors for a smooth operation one sensor put at the bottom, one sensor put at the middle, and one sensor at the top level of the tank. When the water level gets low from the middle sensor, the motor automatically switches on. When the water level touches the top sensor, the motor will automatically be switched off. Water level indication provided to see the water level in the tank. The on-off motor indication provided. High-quality abs enclosure. So there is no workforce required as it is operating as fully automatic. The power system is like Supply voltage 220-270V AC, suitable to 0.1HP to 2.0HP motor.
The product is designed as a fully automatic water controller and dry run protection in a single phase. The device has an anti-corrosion stainless sensor. The contact capacity of the device is 30Amps. There is a start, stop, and auto manual switch. There are both indication for the tank level and the motor status.
The device is well designed as the on/off pump depends upon the water level of the overhead tank. The microcontroller system based on power failure protection. The device use with a float switch or sensor probes/ controller unit 10 AMP load capacity. The machine is well designed that can use up to 2HP motors. The product has 12 months warranty. Also, the device has a controller unit of 16AMPS load capacity and run up to a 2HP motor.
The device well design with an efficiently fully automatic water level controller for the tank sump. This model will automatically switch on and automatically switch off the motor. It has auto on and auto off operation. Auto on occurs when the tank level is low confirming water is present in the sump. Auto-off when the tank is full or when the sump is empty suitable for motor pump up to 2HP. There is the electronic starter. There is an LED indicator in the device for motor on/off. Also has high and low level LED indications to know the level of both tank there will be one low level LED indication. The fully automatic control system and the micro control based design Protect from power failure. The device work with any single-phase or submersible motor for home, office, hospital, restaurant.
The device is designed for the underground tank and the overhead tank. The water level in the main tank is always kept above the reserve level (OL sensor) and below the overflow pipe (OH sensor). If the motor operates continuously for more than 15 minutes (Run Timer), the DWLC 777 turns off the motor and allows it to cool for 30 minutes (Idle Timer). The motor works when the water level in the well/sump reaches the level necessary to start pumping and stops when the water level reaches just above the foot valve. This eliminates the problem of air intrusion into the suction pipe. Pumping will resume 30 minutes after the water level reaches the SL sensor or when the water level reaches the SH sensor. The device mechanism is well designed that avoid overheating and dry run the motor.
The device is so well designed that it can work anywhere water-based. It can be used in the pond water tank, garage, basement flooding rains place where automatic drainage required. The device can work in 12VDC. The 7Amps is designed in it, which is suitable for a 1HP motor.
The device is designed with a voltage supply of 190vac to 250vac for the single phase. The device’s maximum output load can handle up to 230V AC, which is 3680W (1HP Motor). The ideal power consumption is 3VA. The device comes with two float sensor. This system is available for all types of the motor for controlling water, oil, chemicals tank etc.
The device is designed according to the low and high voltage. The low voltage 130V and the high voltage 270V and mainly the overload protection. The inbuilt water level upper and lower bath tank control. There is an LED indicator for both tanks, full and empty. There is a high low and overload indicator LED as well. The device is designed with auto and manual switch. The device is well equipped for use in all home industry and workplace use. The device is also compact to use easily and manage power consumption. Also, the device can avoid overload water wastage.
The device is designed for home and industry use. There is a high-quality M.S. enclosure. Microcontroller based water level controller, all signal will pass in sensor through A.C. filter circuit that provides filter signal to the sensor, that improve the sensor’s life, A.C. signal passes on sensor side so never get the rusting problem. This model automatically switches ON and switch OFF motor. When the water level of the overhead tank becomes low means water gets down from the middle sensor and water is present in the underground tank or sump, the motor gets started automatically. The tank starts filling up. When the water level reaches the higher level, the motor automatically gets switched off. The product has 1 Year Manufacturer warranty service, repair or replacement. The package contains one water level controller unit.
6 S.S. sensors. One user manual with technical details. This model has dry run protection, so it only starts the motor if water present in the underground tank or sump. Suitable for 0.1 HP to 5.0 HP Motor, Protect the motor from dry running. Motor ON-OFF LED indication provided. Water Level indication provided for both tanks. Supply voltage 220-270 V AC, Sensing element 304 S.S. Sensor it is free from oxidation, long life. Any conducting wire can be used for sensor auto mode motor start and stop automatically. In manual mode, the user can start and stop the motor by pressing the start and stop button of the controller.
The device is designed like the system’s primary function is to make the user free of all his daily water filling requirements. The automatic system of the device manages the auto on/off the motor while the water level is low or in full status. The model is suitable for the single tank. It monitors the minimum and maximum level of the water tank. The pump is switched on when the water level is going down and auto-off when the level comes up. In this way, there is no chance of overflow. The device is also available for a single phase submersible pump. There is one year of replacement warranty on the device.
The device is so well designed with a buzzer alarm to alert that the tank is full. The Four levels of indication using bright Red LED with different alarm on tank full and low level Four levels of indication using bright Red Led with “Paani Ki tanki Bhargai Hai “alarm on a tank full. The device includes five stainless steel water level sensor for a tank with 1.5M of attached wire (suitable for tanks up to 2000L). This water level indicator is made using electronic components, which assure longer life and durability. Package contents: 5 sensors, Main indicator panel, Instruction manual, Screws and Wire ties.
The device fully automatic and made in India. There is one year of warranty, and four levels of indication can run motor up to 2HP. The 6SS sensor is a silent operation in both auto and manual mode. The top-up switch works with MCB type starters. The package contains six high-grade stainless steel water level sensor, the main control panel, a user manual and some screws. The product has an excellent quality which is prolonged use and durable. The device is fully automatic, which no need for the workforce to operate and all. The mechanism is easy to install.
The device fully automatic the runs easily and dry run protection single phase. Also, the device has an anti-corrosion stainless sensor. The contact capacity of the device is 30Amps. All the things like start-stop and manual switch are available in the device.
The system automatically controls water pumping from the Underground Sump / Well / Borwell to Overhead Tank. There is an Overhead tank level indication. The Fully Automatic ON & OFF Seller will provide technical support for Installation.
Here are some automatic water level controller lists, and they can be used in both home and industrial use. Mostly it helps when the tank is underground and also on the overhead. This is a smart choice to avoid water wastage.