The bear splitters are used to help you to pull the bearings off axle shafts, remove steering pumps, and more. A puller will help you to remove the power steering pulleys and are pressed-on alternators. A bearing splitter is very effective in removing bearings, pulleys, gears, and bushes that are too close to the housing or other components. The split bearings allow the lower section of the bearing to support the shaft while the top section is removed, making bearing inspection easy without the need to remove drives or the shaft itself. Bearing Splitter has features like “knifelike” edges, which can be positioned behind the part, even if that part is extremely limited, to ensure a gripping surface. If this tool is used with an OTC Grip puller, the external edge of the puller jaws grip attachment is fastened into the two tapped troughs of the attachment. So now as you know how useful a bearing splitter can be for you so let us help you to select the best bearing splitter for you through our buying guide below.

also check- Best Portable Paint Booth / Best Portable Pool Table

 

 

1.Sunex 57BS5 Bearing Splitter

 Best Bearing Splitter 2020

  • bearing Splitter is very durable and long-lasting. The splitter is half of the forged steel of alloy for providing strength and durability. It is made with zinc plating, and the black oxide plating forms the covering that prohibits rust.
  • The design of bearing splitter is designed effectively to remove gears and covers easily and allows the user to remove even the most stubborn covers.
  • This device has sharp angled edges to make your work very easy. In bearing splitter there are two straight and angled edges that allow access between tightly fitting parts and provide for the mechanical support to break the coils on a stable pulling surface.
  • This bearing splitter can be used with 2 mechanical pullers, hydraulic pullers, and sliding beams in conjunction with holes that enable attachments to be pushed or pulled.
  • This device is very easy to use and very effective in reducing your workload.

2.   OTC 4527 5-Ton Single Pressure Beam 

 Best Bearing Splitter 2020

  • is mostly suited for cooking and carrying workers with a diameter of up to 3 cm.
  • The single adjustment point in this device enables the fast connection of the divider to the application.
  • This device offers an ultimate pressure beam in a secure grip surface.
  • In this device the push puller is a splitter matched thread that is used to reduce friction.
  • The device also has the feature of interchangeable legs that is used to reduce or extend the pull range as per the requirement of the user.

3.   Sunex 3920 Seal and Bearing Driver Set

 Best Bearing Splitter 2020

  • This bearing splitter gives the right size driver for almost all installation jobs and also for automotive seals, bears, and bushing.
  • also includes keys, drives, handles, and spacers to reduce your work pressure.
  • This device works excellent with a 5/8-inch to 2-inch size of disks that is suitable for car service.
  • It also comprises of heavy-duty blow mold case that offers convenient storage.
  • This device is a complete set that consists of SAE discs of 5/8″/4 inches and many more disc sizes. The set consists of a large number of disk sizes that you can use according to your wish.

4.    OTC 4518 Stinger 5-ton Bar-Type Puller/Bearing 

 

 Best Bearing Splitter 2020

  • is used for a variety of pulling jobs, separator tools with bar pull and legs,
  • Among all the disc sizes two most popular among them are 2 and 3-inch bear splitters and four hex push puller bear sets.
  • The special feature of this splitter is the screw which is used for pushing the 5-inch bar puller head.
  • The device comprises of a 6-1/4 inch forced crossbar. It can also be used with 5-inch puller and in that each separator of the bearing can be used separately or in conjunction with other pullers or instruments.
  • This device is used with blow-molded plastic storage cases which helps to retain ordered content and is secured against loss.

5.Bearing Puller Separator Set 

 Best Bearing Splitter 2020

  • can be made up of different materials like steel, iron, or plastic and can be of size 5.9 Kg or 12.98 kg and the main part of this device is that it has 14 pieces and comes in dimensions of about 37 x 24 x 6 cm.
  • The basic element that this bearing splitter comprises of are 1) Forged and heat-treated heavy-duty drop 2) 2″ and 3″ edges with separators 3) 4 pushing hex puller leg sets 4) 5′ crossbar puller with force screw 5) Moulded case to store.
  • The product specifics of 14pcs pieces include a drop forged build and two splinter bearing machines of 2′ & 3′ edges and extension legs of about 5′- 4pices and is made up of a drop forged design.
  • This device has a puller head bar of about 6.9 and 1pieces of hooves. It also has to force shoe legs of 4″ – 4pcs and the Yoke base adapter of 6 “– 1piece.

6.   OTC (1183) Bearing Splitter Combo Set

 Best Bearing Splitter 2020

 

  • Bearing Splitter contains four of the most popular bearing dividers and a sweater which is very useful in helping you to do your work.
  • A strong case is also included in this device so that you can hold the resources together immediately.
  • The device set comprises of an OTC 1121 — Splitter Bearing. This device has a maximum width of 15/16 inch and a minimum length of 1/4 inch. The OTC 1122-Splitter bearing has a maximum width of 2 inches and a minimum spread of 1/8 inc. The OTC 1123 – splitter bearing on the other hand has an overall spread of 4-5/8 inch and a minimum spread of 1/2 inch. The OTC 1130-splitter is recommended during traveling it has a maximum spread of 9 cm and a minimum spread of 1/2 inch. The OTC 679 is used for pulling attachment with a maximum of 5-7/8 inch and a minimum spread of 1-3/4 inch.
  • So now it is up to decide which OTC will best suit your work.

7.   ATD Tools 3056 Bar-Type 

 Best Bearing Splitter 2020

  • is forged drop and used for heat treatment.
  • It has a separator bearing of 2 inches and 3 inches.
  • This device comprises of 4 hex push-puller legs sets.
  • It has a crossbar of 5 inches and a puller of about 6-1/4.
  • This device is very efficient to store and move case mold.

8.Sunex 52BS Bearing Splitter, for Shop Press

 Best Bearing Splitter 2020

  • is used to use on Ton Shop presses of 20, 40, and 50 tailored sizes.
  • This device is considered best in providing a clear coating base.
  • This bearing splitter can be found in other shop press applications.

9.OTC 4579 9-Way Slide Hammer Puller Set

 Best Bearing Splitter 2020

  • is a 9 way Hammer Puller Set. It is ideal for pulling rear axle flange styles and most front-wheel drive hubs.
  • The inner and outer jaws of this splitter are used to remove keys, gears, and dyes in various variations.
  • In this bearing splitter the blocks and cones are present in two or three forms and have the optimal mask setup for most workers.
  • This bearing device includes a grip bracket adapter for sheet metal or other unique requirements for pulling of the tooth.
  • This device is used for other OTC 5/8 inch-18 hammer thread connectors.

10.Martin Wheel 4.80/4.00

 Best Bearing Splitter 2020

  • The dimensions of are 4.80 – 4.00 – 8.
  • This bearing splitter comprises of 1 holding.
  • This splitter is best suitable with 6 Ply Tire Tubeless.
  • It also has a special feature of speedy trailer pneumatic DOT.
  • It is made up of valve stem metal to provide an excellent grip.

11.OTC 4422 Pilot Bearing Puller (Pack of 1)

 Best Bearing Splitter 2020

  • uses a lasting bridge to support the pull force and reduce the workforce.
  • The plate of this bearing splitter is limited and the jaws do not rotate as the force passes.
  • This device is great for applications which require two pair of jaws that are used and can be swapped conveniently with two thumb tubes of this device.
  • The design of this splitter is easy to use and eliminates the need for additional software. It blends very well with the style and efficiency of the work.

12.OTC Puller Set, Bearing – 4534

 Best Bearing Splitter 2020

  • is used for various pulling jobs, including alternators that generate steering power and crankshaft pulleys timing equipment and harmonic equilibrium.
  • This device also has drop-forged components that can be used in different combinations.
  • It comprises of edge set that is between 3 and 5 inches wide.
  • This device comprises of a plastic case with blow molds.

13.OTC 4420 Pilot Bearing Pulling Attachment

 Best Bearing Splitter 2020

  • is used to tighten the pilot from the bottom of the crankshaft.
  • This device has an Interchangeable jaws-one pack that covers an area of 1/2 “to 1-1/2” and the other set that covers the area of 3/8 “to 1-3/8”.
  • The range of this splitter is 3/16 minimum to 1-inch maximum.
  • This bearing puller attaches to 5/8-18 threads to OTC and other slide hammers.
  • This device is made up of high-quality materials that guarantee the longevity of the tool life.

14.CTA Tools 8150 6-Inch Bearing Separator

 Best Bearing Splitter 2020

  • comprises of remove generator gears, cones, and like components for better performance.
  • It works in a way by which ordinary jaws do not work to ensure excellent grip and convenience.
  • This bearing splitter has sharp knife-like edges and produces minimize parts damage.
  • It comes in an edge range of up to 6 cm or 15 cm.
  • The heavy-duty construction of this device gives stability and power to work.

15.OTC (1170) Pilot Bearing Puller

Best Bearing Splitter 2020

  • bearing splitter is a versatile puller that is specifically designed for internal pulling applications.
  • It is excellent to remove tractor, truck, and tractor flywheel space.
  • This is also very convenient for the pump, generator, and magnet rollers.
  • It gives a minimum spread of 1/2 and maximum spread 1-1/2.

Pick the best one for you

Nowadays consumers purchase goods from online retailers which makes their shopping very convenient.  In reality, customers can buy almost anything from companies that sell their goods online, and now you are very well aware of different types of bearing splitters. There are a lot more choices that you can get on the internet. Because of the convenience of online shopping, many people prefer to shop online and so why not you. Hurry up and get the best bearing splitter for you. This will be very helpful to reduce your work burden and improve your efficiency at work.